Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will protect your car from key-long theft and relay theft. With a personal PIN sequence, unless they know the code, your car won't start!
It also comes with Transport Mode that allows you to temporarily disable the device which is ideal for transport and servicing. It is then activated by entering a PIN code again.
No Key Fobs or Indicators with Leds
The Ghost 2 immobiliser offers a effective defense against modern theft methods. Its undetectable installation and engine start blocking will reduce the risk of your vehicle being stolen, which can give you peace of mind and potentially even reduce insurance premiums.
It operates without emitting radio frequency signals, which makes it undetectable by traditional scanners and can't be hacked using common methods such as key cloning and signal jamming. The device uses existing buttons on your vehicle such as those on the steering wheel, door panels, and the centre console to generate a unique, changeable PIN code sequence that can be up to 20 presses in length. If the correct sequence is entered or when the beacon or mobile app is utilized, only the owner is able to start the engine, giving an additional layer of security against thieves.
You can also enable an easy service mode when you need to perform tasks such as valet parking or servicing, which require you to temporarily disable your system. The mobile app makes it easy to do this, and ensures that your vehicle is secure when it is being serviced. When the work is done it is simple to switch back to secure mode. This will ensure that your car is secure throughout the day.
In contrast to other aftermarket immobilisers that operate with a fob, the Ghost 2 can be operated directly via the existing buttons, making it far simpler to use than traditional systems. The app can be used as a spare key in case of emergency. This allows you to drive while your security is off, without having to enter a pin code.
No Radio Frequency Signals
Contrary to traditional security systems which come with their own remote, the Ghost 2 immobiliser doesn't require any additional key fobs and can be operated using existing buttons on the centre console or steering wheel. It is indetectable by thieves who use the RF scanning technology or code grabbing, which means your car will not start should they take your key.
The device uses an exclusive 'password' sequence of buttons that locks the engine. The personalised PIN code can be entered on the app or via the buttons on the steering wheel and centre console. You can also lock the gearbox, so that your vehicle cannot be driven unless you've got your key or pin code. The device can be set to transport mode, which allows you to drive the car without having to enter your pin code. This will provide extra protection for your vehicle if it is left to service or valet park.
The Ghost 2 immobiliser is designed to act as a deterrent to theft that is as discreet as possible, which makes it an appealing option for those who have spent an enormous amount of money making their vehicles more unique or have rare or expensive cars. Keep Reading have stated that this is an excellent way to protect their cars from theft and some have even shared stories of attempted thefts stopped by the device. The Ghost 2 also offers a wide range of options and customers have reported that it works with their regular car keys and also with the emergency button on their vehicle, giving them peace of mind while they are away from their vehicle.
No Radio Frequency Scanners
Ghost immobilisers safeguard your vehicle from key copying and theft. The system makes use of the buttons inside your vehicle, like those on the dashboard and your steering wheel, to create a unique, changeable button sequence that only you can identify. Your car won't begin without this sequence. This combination of an unique disarming sequence and the lack of radio frequency signals make the device extremely difficult to penetrate or to bypass.
In contrast to devices that rely on radio frequency scanning The Ghost CAN Immobiliser operates completely silently and does not require any external signals to do its magic. It is a safer alternative and can be insured if it is installed by an installer who is TASSA-approved (we are one of them!) ).
It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to how it works with your vehicle. This ensures that it's seamlessly integrated into your vehicle's systems, which results in optimal performance and a significantly less risk of malfunction.
Furthermore, professional installation usually comes with warranties and service, further enhancing the value of your investment. This is a major deterrent for would-be thieves, who are less likely to try any attempt to bypass the device because of its extensive security features and professional installation.
As well as being an effective deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly as well. It can be set to automatically re-arm itself after a specific amount of time, which means you don't have to recollect your PIN every time you park your vehicle. It also allows the option of Service/Valet Mode in the event that you need to hand your vehicle over to service or valet parking. This can be turned on or off based on your preference using a simple indication sequence.
No Wire Cutting
The Ghost 2 does not require cutting any wires from your car during installation, ensuring non-invasive integration with the original systems of your vehicle. It connects to your vehicle's CAN data network and is programmed with a unique PIN, preventing anyone else from starting your engine if they don't have a unique PIN sequence or app authorization.
It's also quiet since it doesn't emit radio signals like other immobilisers. It is weatherproof, sealed and small enough to be concealed anywhere within the vehicle.
Another advantage of the Ghost II is that it can be switched to "transport mode" for short durations without the need for an individual PIN sequence. This is a great option for situations like giving the car to a family member, or in an emergency. You can start your car quickly and securely.
When installing the Ghost II, it's important to work in a well-lit space and wear safety gear for working with tools and electrical components. A basic set of hand tools can enable you to make precise connections while a multimeter will help verify electrical values and ensure your wiring is secure. Insulation tape and cable ties can also be used to protect or rejoin any exposed or cut wires during the installation process.
It is essential to disconnect the vehicle's battery before beginning any wiring work. This will prevent any airbag deployments by accident or electrical shocks from happening if the battery is disconnected when the Ghost II is still connected to your vehicle's system.
Easy to Install
The Ghost immobiliser, a distinctive device of the next generation, works by directly connecting to your vehicle's CAN Data Network. It utilizes a unique pin code to prevent it from beginning. This makes it much more difficult to hack than standard alarm systems or after market key fobs, and provides superior protection against key cloning hacking as well as relay attacks.
The unit can be hidden within your vehicle and utilises the existing buttons on your dashboard and steering wheel to create an sequence that only you know. This stops thieves from using a stolen car key to open it and also stops them from using the diagnostic tool that thrives on hacking OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus via an unchanging 12V supply and a grounding connector. A multimeter is required to determine the proper wires. Basic hand tools will suffice for the installation. Insulation tape or heat shrink tubing is recommended to safeguard the connections and cable ties can be utilized to keep the wiring tidy and organized.
Once it is installed, the device goes into a learning mode which captures your specific buttons or sequences to create your own unique pin code. This information is then stored in the CAN data network, which makes it impossible for anyone else to duplicate your sequence and start your vehicle.
If you forget your PIN Code or sell your car a button become inoperative there is an emergency override feature called Transport Mode. This will turn off the Ghost system completely, but will automatically activate when you reach 31mph for over 15 minutes or you enter your PIN Code. This is perfect for those who rent their cars frequently through services like Turo or ZipCar.